To meet diverse requirements of our clients in the best possible manner, we are offering a comprehensive range of Wire. Used in oil & gas, heat exchangers, aerospace, pharmaceutical and defence, offered filler wire is manufactured by adept professionals using premium quality nickel alloy and cutting edge technology. Our provided filler wire is checked against different quality measures so as to ensure its quality. In addition to this, provided filler wire is available in different specifications.
With an objective to fulfill the ever evolving demands of our clients, we are engaged in offering a wide assortment of Nickel Alloy Wires.
i)Inconel Wires :
We are offering Inconel Wire to our customers. It is made of the good quality raw material having optimum tensile strength.
| Product | Tensile (ksi) | .2% Yield (ksi) | Elongation (%) |
|---|---|---|---|
| Rod & Bar | 75-100 | 30-60 | 60-30 |
| Alloy | Alloy 800 (UNS N08800) | Alloy 800H (UNS N08810) | Alloy 800HT (UNS N08811) |
| Bar | B408 | B408 | B408 |
ii)Hastelloy Wires :
We are instrumental in offering a broad array of Hastelloy Wire to our valued customers. This offered range of Hastelloy Wire is extensively applied in marine, power, pollution control, paper processing, chemical processing, and waste disposal industries.
iii) Monel 400/500 Wires :
Being the most respected organization guided by experienced and knowledgeable professionals, we are offering a fine quality Monel Wire that isused in various industries.The offered wire is manufactured by our vendors’ experts using superior quality raw material and modern technology.
iv) Nickel 200/201 Wires:
We, Navgrah Steel are one of the famous manufacturers of an extensive array of SNickel 200/201 Wires. Our offered range consists of best grade Wires.
v) Sanicro 28/Alloy 28 Wires :
vi) Alloy 20 Round Wires :
We are offering Inconel Wire to our customers. It is made of the good quality raw material having optimum tensile strength.
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Incoloy 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Incoloy 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4MNiCr22Mo9Nb | NiCr23Fe |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Alloy 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Alloy 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
|---|---|---|---|---|---|---|---|
| Hastelloy C276 | N10276 | 2.4819 | – | NiMo16Cr15W | NW 0276 | – | ХН65МВУ |
| Hastelloy C276 | Ni | C | Mo | Mn | Si | Fe | P | S | Co | Cr |
| Balance | 0.010 max | 15.00 – 17.00 | 1.00 max | 0.08 max | 4.00 – 7.00 | 0.04 max | 0.03 max | 2.5 max | 14.50 – 16.50 |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Hastelloy C22 | N06022 | 2.4602 | – | NiCr21Mo14W | NW 6022 | – | – |
| Hastelloy C22 | Ni | C | Mo | Mn | Si | Fe | P | S | Co | Cr |
| Balance | 0.010 max | 12.5 – 14.5 | 0.50 max | 0.08 max | 2 – 6 | 0.02 max | 0.02 max | 2.5 max | 20 – 22.5 |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Monel 400 | N04400 | 2.4360 | NU-30M | NiCu30Fe | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Monel K500 | N05500 | 2.4375 | – | – | – | – | – |
| Monel K500 | Ni | C | Al | Mn | Si | Fe | Cu | S | Ti | Cr |
| 63.0 min | 0.25 max | 2.3 – 3.15 | 1.5 max | 0.5 max | 05 – 2 | 27.0 – 33.0 | 0.010 max | 0.35 – 0.85 | – |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
| Ni | Fe | Cu | C | Mn | S | Si |
|---|---|---|---|---|---|---|
| 99.0 min | .40 max | .25 max | .15 max | .35 max | .01 max | .35 max |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
We are well-known manufacturer and supplier of Special Stainless Steel Wire. Our client can avail Stainless Steel Wire in best market price from us. Stainless Steel Wire has a brilliant mirror bright surface resulting in a radiant appearance when electro-polished.
| JIS G4304/4305 | ASTM A240 | EN |
| SUS 890L | UNS N08904 | 1.4539 |
| Grade | Ni | Mo | Cr | Cu | C | Mn | Si | P | S |
| 904L | 23 – 28 | 4 – 5 | 19 – 23 | 1 – 2 | 0.02 max | 2.0 max | 1.0 max | 0.045 max | 0.035 max |
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 310 | S31000 | 310S24 | - | 1.4840 | X15CrNi25-20 | ||
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 310 | min. max. | - 0.25 | - 2.00 | - 1.50 | - 0.045 | - 0.030 | 24.0 26.0 | - | 19.0 22.0 | - |
| 310S | min. max. | - 0.08 | - 2.00 | - 1.50 | - 0.045 | - 0.030 | 24.0 26.0 | - | 19.0 22.0 | - |
|
Grade |
301,304,304l,321,316,316l,309s,310 |
|
Thickness |
Cold rolled:0.2-3.0mm Hot rolled:3.0-60mm |
|
Length |
As customer’s requirement |
|
Surface Finish |
2B,2D,BA,NO4, Hair Line,6K, etc |
|
Manufacture Technology |
Cold rolled/ Hot rolled |
|
Material |
DDQ, High Copper, Half Copper or Low Copper Material |
|
Standard |
JIS, ASTM, AISI, GB, DIN, EN, etc we usually use ASTM and GB Standard |
| Element | Iron, Fe | Chromium, Cr | Nickel, Ni | Molybdenum, Mo | Manganese, Mn | Silicon, Si | Phosphorous, P | Carbon, C | Sulfur, S |
|---|---|---|---|---|---|---|---|---|---|
| Content (%) | Balance | 18-20 | 11-15 | 3-4 | 2 | 1 | 0.045 | 0.03 | 0.03 |
| Element | C | Si | Mn | P | S | Cr | N | Fe | Ni |
| Percent by Weight | 0.080% | 75.00% | 200.00% | 4.50% | 0.03 | 17.00-19.00 | 10.00% | Balance | 9.00-12.00 |
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Flanges, Fittings & Valves |
|---|---|---|---|---|---|---|
| A790 | A790 | A789 | A789 | A240 | A276 | A182 |
| Cr | Ni | Mo | C | N | Mn | Si | P | S | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 22.0-23.0 | 4.50-6.50 | 3.00-3.50 | .030 Max | 0.14-0.20 | 2.00 Max | 1.00 Max | .030 Max | .020 Max | Balance |
| Cr | Ni | Mo | C | N | Mn | Si | Cu | P | S | Fe |
|---|---|---|---|---|---|---|---|---|---|---|
| 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.030 Max | .24-.32 | 1.20 Max | 0.80 Max | 0.50 Max | 0.035 Max | 0.020 Max | Balance |
| Pipe Welded | Tube Welded | Sheet/Plate | Bar | Flanges & Fittings |
|---|---|---|---|---|
| B675, A312 | B676, A249 | B688, A240 | B691, A479 | B462, A182 |
| Standard | 316Ti |
|---|---|
| UNS | S31635 |
| Werkstoff Nr. | 1.4571 |
| Element | C | Si | Mn | P | S | Cr | Mo | N | Fe | Ni | Ti |
| Min | - | - | - | - | - | 16 | 2 | - | Balance | 10 | 5x%(C+N) |
| Max | 0.08 | 0.75 | 2 | 0.45 | 0.03 | 18 | 3 | 0.1 | 14 |
| UNS No | Old British | Euronorm | Swedish | Japanese | ||
| BS | En | No | Name | SS | JIS | |
| S30815 | - | - | 1.4835 | X9CrNiSiNCe21-11-2 | 2368 | - |
| Cr | Ni | C | Si | Mn | P | S | N | Ce | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 20.0-22.0 | 10.0-12.0 | 0.05-0.10 | 1.40-2.00 | 0.80 Max | 0.040 Max | 0.030 Max | 0.14-0.20 | 0.03-0.08 | Balance |
We are offering high quality range of High Strength Steel Wires. These products are widely demanded by the clients for their precise use. Moreover, one can get these products in committed time frame that too after testing their quality under rigorous measures. Our products are suitable for various industrial applications.
| Item | Hot Rolled Medium and High Tensile Structural Steel - IS 2062 E250BR |
|---|---|
| Thickness | 5mm-150mm |
| Width | 1000mm-4500mm |
| Length | 3000mm-18000mm |
| Grade | C | Mn | S | P | Si | Carbon Equivalent (CE), Max |
|---|---|---|---|---|---|---|
| IS 2062 E 250 BR | 0.22 | 1.50 | 0.045 | 0.045 | 0.40 | 0.41 |
| Item | Hot Rolled Medium and High Tensile Structural Steel - IS 2062 E410BR |
|---|---|
| Thickness | 5mm-150mm |
| Width | 1000mm-4500mm |
| Length | 3000mm-18000mm |
| Item | Hot Rolled Medium and High Tensile Structural Steel - IS 2062 E450BR |
|---|---|
| Thickness | 5mm-150mm |
| Width | 1000mm-4500mm |
| Length | 3000mm-18000mm |
| C | Si | S | P | N | Mn | Cu | Nb+Ti+V | CEV |
| 0.22 max.(%) | 0.50 max.(%) | 0.02 max.(%) | 0.025 max.(%) | 0.012 max.(%) | 1.65 max.(%) | 0.35-0.20 | 0.25 max.(%) | 0.54 max.(%) |
| Item | Strenx 600 Plate |
| Standards | EN 10149-2, EN 10051, EN 10163-2 |
| Material | Strenx 600 |
| Thickness | 2.00-10.00 mm |
| Width | up to 1600 mm |
| Length | Up to 16000 mm |
| C | Si | Mn | P | S | Al | Nb |
| 0.12 | 0.21 | 1.90 | 0.025 | 0.010 | 0.015 | 0.09 |
| Item | Strenx 650 Plate |
| Standards | EN 10149-2, EN 10051, EN 10163-2 |
| Material | Strenx 600 |
| Thickness | 2.00-10.00 mm |
| Width | up to 1600 mm |
| Length | Up to 16000 mm |
| Grade | C max | Si max | Mn max | P max | S max | AL max | Nb max | V max | Ti max | Mo max | B max |
| S650MC | 0.12 | 0.6 | 2 | 0.025 | 0.015 | 0.015 | 0.09 | 0.2 | 0.22 | 0.5 | 0.005 |
| Item | Strenx 700 / 700MC / 700 RC Plate |
| Standards | EN 10149-2, EN 10051, EN 10163-2 |
| Material | Strenx 700 |
| Thickness | 2.00-10.00 mm |
| Width | up to 1600 mm |
| Length | Up to 16000 mm |
Grade |
C |
Si |
Mn |
P |
S |
Al (min) |
Nb |
V |
Ti |
Mo |
B |
S700MC |
0.12 |
0.60 |
2.10 |
0.025 |
0.015 |
0.015 |
0.09 |
0.20 |
0.22 |
0.50 |
0.005 |
| Carbon (C%) | Manganese (Mn%) | Silicon (Si%) | Phosphorus (P%) | Sulfur (S%) |
|---|---|---|---|---|
| ≤ 0,18 | ≤ 2,00 | ≤ 1,00 | 0,02 | 0,01 |
| Grade | C % | Si % | Mn % | P % | S % | N % | Cu % |
| S275JR | 0.240 | - | 1.600 | 0.045 | 0.045 | 0.014 | 0.060 |
| Standard | Length | Width | Size (mm) | Thickness | Process |
|---|---|---|---|---|---|
| ASTM A588, A242 | 3000mm -18000mm | 1000mm-4500mm | 3-150*900-4100*3000-18000 | 5mm-150mm | Hot Rolled (HR) |
| Grade | C | Si | Mn | P | S | Al | V | Cu | Cr | Ni |
| CORTEN A | 0.12 max | 0.25 - 0.75 | 0.20 - 0.50 | 0.07 - 0.15 | 0.030 max | 0.015 - 0.06 | - | 0.25 - 0.55 | 0.50 - 1.25 | 0.65 max |
| CORTEN B | 0.19 max | 0.30 - 0.65 | 0.80 - 1.25 | 0.035 max | 0.030 max | 0.020 - 0.06 | 0.02 - 0.10 | 0.25 - 0.40 | 0.40 - 0.65 | 0.40 max |
