Fasteners come in many different forms. To make it easy for you, we’ve compiled the data below as a guide for figuring out what each fastener is called. Our organization provides a wide range of Fasteners. Our product is widely demanded I the market due to its superior quality and also because of its salient features.
Navgrah Steel is a most acclaimed Nickel Alloy Fasteners manufacturer, exporter & suppliers in India. These fasteners are widely used in various equipments for fastening purpose. In addition to this, our valuable clients can purchase the provided Nickel Alloy Fasteners at pocket friendly prices from us.
Adhering to the industry laid guidelines, our firm is engaged in manufacturing and supplying a broad range of Inconel Fasteners. These fasteners are offered in different sizes and standards so as to fulfill the diversified requirements of our most valued clients.
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Incoloy 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4MNiCr22Mo9Nb | NiCr23Fe |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Alloy 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.30 max | - | 50.00 - 55.00 | 17.00 - 21.00 |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
|---|---|---|---|---|---|---|---|
| Hastelloy C276 | N10276 | 2.4819 | – | NiMo16Cr15W | NW 0276 | – | ХН65МВУ |
| Hastelloy C276 | Ni | C | Mo | Mn | Si | Fe | P | S | Co | Cr |
| Balance | 0.010 max | 15.00 – 17.00 | 1.00 max | 0.08 max | 4.00 – 7.00 | 0.04 max | 0.03 max | 2.5 max | 14.50 – 16.50 |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Hastelloy C22 | N06022 | 2.4602 | – | NiCr21Mo14W | NW 6022 | – | – |
| Hastelloy C22 | Ni | C | Mo | Mn | Si | Fe | P | S | Co | Cr |
| Balance | 0.010 max | 12.5 – 14.5 | 0.50 max | 0.08 max | 2 – 6 | 0.02 max | 0.02 max | 2.5 max | 20 – 22.5 |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Monel 400 | N04400 | 2.4360 | NU-30M | NiCu30Fe | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Monel K500 | N05500 | 2.4375 | – | – | – | – | – |
| Monel K500 | Ni | C | Al | Mn | Si | Fe | Cu | S | Ti | Cr |
| 63.0 min | 0.25 max | 2.3 – 3.15 | 1.5 max | 0.5 max | 05 – 2 | 27.0 – 33.0 | 0.010 max | 0.35 – 0.85 | – |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
| Ni | Fe | Cu | C | Mn | S | Si |
|---|---|---|---|---|---|---|
| 99.0 min | .40 max | .25 max | .15 max | .35 max | .01 max | .35 max |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
| STANDARD | Material No. | EN Designation | UNS |
| Alloy 28 | 1.4563 | X1NiCrMoCuN31-27-4 | N08028 |
| C % | Si ≤ % | Mn ≤ % | P ≤ % | S ≤ % |
| ≤ 0.02 | 0.70 | 2.00 | 0.03 | 0.01 |
Navgrah Steel is a name in the Stainless Steel Fasteners manufacturing which needs no introduction. Our comprehensive range of Stainless Steel Fasteners comes in several designs, sizes and specifications in order to cater the challenging demands of various industries like automobile, construction, manufacturing, etc.
| JIS G4304/4305 | ASTM A240 | EN |
| SUS 890L | UNS N08904 | 1.4539 |
| Grade | Ni | Mo | Cr | Cu | C | Mn | Si | P | S |
| 904L | 23 – 28 | 4 – 5 | 19 – 23 | 1 – 2 | 0.02 max | 2.0 max | 1.0 max | 0.045 max | 0.035 max |
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 310 | S31000 | 310S24 | - | 1.4840 | X15CrNi25-20 | ||
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 310 | min. max. | - 0.25 | - 2.00 | - 1.50 | - 0.045 | - 0.030 | 24.0 26.0 | - | 19.0 22.0 | - |
| 310S | min. max. | - 0.08 | - 2.00 | - 1.50 | - 0.045 | - 0.030 | 24.0 26.0 | - | 19.0 22.0 | - |
|
Grade |
301,304,304l,321,316,316l,309s,310 |
|
Thickness |
Cold rolled:0.2-3.0mm Hot rolled:3.0-60mm |
|
Length |
As customer’s requirement |
|
Surface Finish |
2B,2D,BA,NO4, Hair Line,6K, etc |
|
Manufacture Technology |
Cold rolled/ Hot rolled |
|
Material |
DDQ, High Copper, Half Copper or Low Copper Material |
|
Standard |
JIS, ASTM, AISI, GB, DIN, EN, etc we usually use ASTM and GB Standard |
| Element | Iron, Fe | Chromium, Cr | Nickel, Ni | Molybdenum, Mo | Manganese, Mn | Silicon, Si | Phosphorous, P | Carbon, C | Sulfur, S |
|---|---|---|---|---|---|---|---|---|---|
| Content (%) | Balance | 18-20 | 11-15 | 3-4 | 2 | 1 | 0.045 | 0.03 | 0.03 |
| Element | C | Si | Mn | P | S | Cr | N | Fe | Ni |
| Percent by Weight | 0.080% | 75.00% | 200.00% | 4.50% | 0.03 | 17.00-19.00 | 10.00% | Balance | 9.00-12.00 |
| Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Flanges, Fittings & Valves |
|---|---|---|---|---|---|---|
| A790 | A790 | A789 | A789 | A240 | A276 | A182 |
| Cr | Ni | Mo | C | N | Mn | Si | P | S | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 22.0-23.0 | 4.50-6.50 | 3.00-3.50 | .030 Max | 0.14-0.20 | 2.00 Max | 1.00 Max | .030 Max | .020 Max | Balance |
| Cr | Ni | Mo | C | N | Mn | Si | P | S | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 22.0-23.0 | 4.50-6.50 | 3.00-3.50 | .030 Max | 0.14-0.20 | 2.00 Max | 1.00 Max | .030 Max | .020 Max | Balance |
| Cr | Ni | Mo | C | N | Mn | Si | Cu | P | S | Fe |
|---|---|---|---|---|---|---|---|---|---|---|
| 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.030 Max | .24-.32 | 1.20 Max | 0.80 Max | 0.50 Max | 0.035 Max | 0.020 Max | Balance |
| Pipe Welded | Tube Welded | Sheet/Plate | Bar | Flanges & Fittings |
|---|---|---|---|---|
| B675, A312 | B676, A249 | B688, A240 | B691, A479 | B462, A182 |
| Standard | 316Ti |
|---|---|
| UNS | S31635 |
| Werkstoff Nr. | 1.4571 |
| Element | C | Si | Mn | P | S | Cr | Mo | N | Fe | Ni | Ti |
| Min | - | - | - | - | - | 16 | 2 | - | Balance | 10 | 5x%(C+N) |
| Max | 0.08 | 0.75 | 2 | 0.45 | 0.03 | 18 | 3 | 0.1 | 14 |
| UNS No | Old British | Euronorm | Swedish | Japanese | ||
| BS | En | No | Name | SS | JIS | |
| S30815 | - | - | 1.4835 | X9CrNiSiNCe21-11-2 | 2368 | - |
| Cr | Ni | C | Si | Mn | P | S | N | Ce | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 20.0-22.0 | 10.0-12.0 | 0.05-0.10 | 1.40-2.00 | 0.80 Max | 0.040 Max | 0.030 Max | 0.14-0.20 | 0.03-0.08 | Balance |
| Grade | C | Si | Mn | P≤ | S≤ | Cr | Mo | Ni | Other |
|---|---|---|---|---|---|---|---|---|---|
| SS 304 | ≤0.07 | ≤1.00 | ≤2.00 | 0.035 | 0.03 | 17-19 | - | 8.0 | - |
| SS316 | ≤0.08 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 16-18.5 | 2 | 10.0 | - |
| SS 321 | ≤0.12 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 17-19 | - | 9.0 | Ti≥5×C |
We provide all types of High Strength Steel Fasteners available in different grades. Our high-quality range of High Strength Steel Fasteners are exclusively designed for steel factories, petrochemical industry, fire protection systems, chemical industries, shipping/shipment industries, etc. Our High Strength Steel Fasteners are made with precision using the best quality raw materials. We also offer customized High Strength Steel Fasteners as per the customers requirement.
| Standard | : | ASTM / ASME A/SA 193 / 194 |
| Sizes | : | "¼ to 4” |
| Length | : | UPTO 5 METERS |
| Specification | : | IS, BS, ASTM |
| Type | : | Bolts, nuts, Washers, Anchor Fasteners, Stud Bolts, Eye Bolt, Stud, Threaded Rod, Cotter Pin, Socket Screw, Fine Fasteners & Spares, Foundation Fasteners, etc. |
